The most important part of this machine is the sowing unit. Therefore the machine is usable for sowing of all kinds of seeds, up to a diameter of 4 mm. The "Midi" sowing machine is a self-driven sowing machine and has cage-wheels with differential.
The machine is driven by an 8 hp fuel engine, which also drives the sowing part on. The sowing part can be uncoupled separately from driving part. The frame is made of stainless steel "Aisi 304". The machine has 3 gears frontward and 1 gear backwards. During operation the machine makes a gully into the ground in which the seeds will fall. These seeds will be covered by the covering wheel. The sowing distance, row distance and sowing depth are fully adjustable with this machine. The machine has a standard width of 80 cm and is only in this design deliverable.
This machine is especially developed for sowing on so called beds. The precision of rolls in combination with the tractor take care of a fine sowing view. In contrast with the 3-point sowing machine is after sowing the sowing bed flat and everywhere equal pressed. This is optimal for harvesting by machine. From the cabin of the tractor will it be possible to connect and disconnect the sowing distance, used seeds, quantity seeds per square meter as even the ground-speed including speed control for driving to hard and filling of the sowing units are adjustable. The machine is deliverable with a width of 1,20 m and 1,40 m. The minimum distance between the rows is 6 cm.